|
|
|
|
#1 | |||
|
Just parked the car
Join Date: Feb 2011
Location: Carlsbad
Camera: Canon 7D
Posts: 16
|
@liriel Good luck this weekend!
@MJAJmom Great questions! I can't tell you what it will be because all light is different. I can only show you how to think about these concepts in a way that will help you find the right settings on your own through a little bit of practice and thinking differently about light as it relates to your camera's technical operation. There are two details that I'd have to know to provide an answer so I'll address them and then share how to make the decision based on some criteria. When you calculate shutter speed and ISO, you have to know two other things: aperture and focal length. Here's an example... You're shooting a parade and you're up close...1st row of spectators. That puts you at about 20 yds or so from the action. You're shooting with a 50mm lens or a zoom lens that you set to 50mm. The first rule to know is that in order to shoot a still subject, hand-held (without a tripod) and get a sharp image, your shutter speed would need to be at least as fast as the reciprocal of the focal length. On a 50mm lens, that would be 1/50 of a second in this case, preferably even one notch faster. If I'm shooting with a longer lens like a 200mm, then I'm already a bit further in the whole with shutter speed meaning that I'm going to need THAT much more shutter speed just to shoot a still subject hand held. So let's say you set your camera to the shooting mode of Aperture Priority and set your aperture to f/8 to get a good sharp image with some good front to back focus. If you start off at ISO 100 (just to see what your camera will recommend for shutter speed), your camera will find a shutter speed that it determines will get you "the recommended exposure" based on the scene. In this case it might determine that a shutter speed of 1/100 works well in this light. I'm only using that number as an example. If so, you already know that by taking pictures of still subjects at these settings your images ought to come out sharp provided you have relatively steady hands. To capture slow moving subjects, I typically like jumping up to a shutter speed of around 1/250 to start with. I'll poke around at this speed with a few test shots. I'll make sure that when I view my test images in my LCD that I zoom in quite a bit on the LCD. All images look sharp when they're only 1 inch by 1 inch. When you zoom in you're likely to see the image as it really is....whether sharp or not. The closer you get to your subject, the more movement you'll have to plan for. If the subjects in the parade are moving more quickly, you may need a shutter speed upwards of 1/600 or so. In less light, I'd personally be more inclined to open the aperture as a trade-off for increasing the ISO since a higher ISO will add noise to your image while a larger aperture will only reduce depth of field. Sometimes higher ISOs cannot be avoided though. Some Canon users (depending on camera model) can benefit from specific ISO settings that produce less noise. For more on this check out this blog article: Noise Levels at specific ISO levels on a Canon 7D Hope this helps...let me know if it brings up more questions. Have a great weekend! |
|||
|
|
|
|||
| Sponsored Links |
|
|
#2 | |||
|
Moderator
![]() ![]() ![]() Join Date: Jan 2010
Location: Southern California
Posts: 10,453
|
Thanks for all of the discussion on this, it has been helpful.
One thing I learned when playing with the Sunny 16 lesson is that what *I* think is bright may not actually be 'bright.' On what I thought was a very bright day I used Sunny 16 and ended up with photos that were almost too dark, which I didn't realize until I viewed them on the computer. So i went down to a 10 and 12 and it ended up being much better. Then I went out in truly bright sunlight and took pictures of my daffodils getting a lot of bright sun and used Sunny 16. Much better! So this was a good lesson for me not only in what setting to use, but also about taking in more detail about light/surrounding to chose the correct settings. |
|||
|
|
|
|||
|
|
#3 | |||
|
Just parked the car
Join Date: Feb 2011
Location: Carlsbad
Camera: Canon 7D
Posts: 16
|
That's a great point!
Sunny 16 really works well in the middle of the day when the light is harshest. 2 points that I'd like to share in response... I. If you're shooting in .jpg format and the image brightness looks drastically different from your camera LCD to your computer monitor, I would check 2 things: 1) Check to see that your LCD brightness is at normal or 0 depending on your camera make/model. I'll refrain from providing directions to this since it will be different for every camera but suffice it to say that instructions can be found in your user manual. 2) Calibrate your computer monitor. I may have just crossed over into an area of techie speak that may intimidate some people but calibrating your monitor is really quite easy with the right tool. Here's the deal on this... Monitors are made with varying color schemes and brightness settings. Some monitors favor yellows more than blues while others favor reds more than greens and so on. The goal of monitor calibration is to make an image on one's monitor look exactly like a printed version of the very same image. Essentially, I ought to be able to print a photo and hold it up next to my monitor showing the very same image and the two look identical with no difference in brightness or color. To do so requires a software/hardware tool called a calibration system. These systems can be purchased for anywhere between $150 - $1,000 depending on the degree of precision that you wish to achieve. However, these tools can be rented for $16 plus return shipping at BorrowLenses.com The calibration process is a relatively short one that is driven by a short series of intuitive prompts. II. To the other point about dropping down...for other lighting scenarios, wikipedia, of all places has a chart right near the top of the page that provides guidance on other settings to get proper exposures including how to shoot in snow and overcast skies. |
|||
|
|
|
|||
![]() |
| Thread Tools | |
| Display Modes | |
|
|