![]() |
Im really struggling to upload photos
Hi
iv never uploaded on here before but im really struggling. iv tried doing it through browsing my computer and its saying the file is to large but i dont know how the make the photo any smaller iv also tried uploading through photobucket and doing this its says it uploaded but when i look it hasnt! could anyone please help on uploading in to the gallery? thanks in avance |
What program are you using to create your layouts as I am guessing there are different ways of resizing etc.
I use PSE 8 at the moment and there is an option to save for web where I can reduce the layout to 600x600 and also reduce the file size. |
I had problems with mine being too large at first as well. I'm not sure what program you use, but for mine I right-click in my scrapbooking program to edit the dimensions to get it down to 600x600.
|
Like the others said, it's best to save your image smaller than your original size (600x600 is ideal). The file size shouldn't be too big, either. 180k used to be the max, but you can go over a little bit (maybe up to around 300k). The system will try to reduce it automatically when it uploads - it just can't do it if it is too large.
Also, the file needs to be a .jpg format (not .png like you uploaded to photobucket). |
Hi girls
thanks for replying. Im using DSA2. ok next time a make a page i will save it again smaller in a different folder and i will see if i can get it uploaded. thanks again |
managed to upload my page i had to save it at 400x400 to be 180k
thanks again for your help |
When you save it as 600x600, what is the size of the file (in kb)?
|
it is 350k.
|
The system will 'try' to reduce your photo to 180k and 600x600, but if it's too large, it has trouble. So I'm guessing 350k is too large. Try to get it in the 200k range max. See if you have a 'quality' setting for jpgs. I think I usually do mine around 70%.
|
You can also try using the free program "PixResizer" to reduce the size. http://pixresizer.en.softonic.com/
Sometimes it helps with the file size, sometimes it still doesn't quite get it where you need it to be. Worth a shot though! |
Quote:
Just noticed you use DSA2 as well. I just play with the DPI size until I get it under 280. Sometimes if it is a really layered layout or has lots of items, I'll reduce the quality a bit. |
I too am having a hard time getting the file size down. I am using PSE8. No problem changing resampling the pixels to 600x600 - or any other size. I guess my problem is the resolution. 300 dpi - way too big. Even if I change it to 72 (display), quality is sacrificed (looks grainy) but regardless the file size is still to large. :pc:
I do my layouts 12x12 inches, 300 dpi. If I change it to 600x600 pixels (or less) what is the minimum resolution? Thanks for the help! :surrender: Sandy |
Hi Sandy,
I use PSE7… I’m assuming it’s pretty similar. I also use 12x12 at 300dpi. I go File > Save for Web. Make sure the file type is set to jpg. Change either the length or the width to 600 (remember to hit “Apply”!!). Finally, adjust the quality slider… I set mine to about 71% (you can see below your preview image the estimated file size – it will change as you move the slider). If you’ve done all this and it still won’t let you upload, please tell me the exact error you are getting (paste it here). Hope that helps. Carol |
EUREKA!! :yeah: My problem was that I was saving it as a PNG not JPEG. Somewhere, still floating around in the grey matter, I knew it needed to be a jpeg. Thank you Carol for your great directions!
Thank you Carol for all you do! :flowers: I have so much fun on this site. It is a great creative outlet and stress reliever for me. Hope you are having a great day! Sandy |
any SBC+ users have any tips on how to save a page 600x600?
|
Reducing JPG files in PSE8
Hi all! I saw a question on another thread about reducing JPGs in PSE8. I'm one who worries about resolution loss when reducing my file. Below are the steps I take to control for resolution loss and getting my files to the right size to upload to the Gallery. It is a lot of steps, but I have found that it is well worth it!
1. I create LO's in the 12x12 @ 300dpi form just like you. When I resize, I merge all my layers down so that I have only one layer. I then go in the Image menu > Resize > Image Size. Up pops the Image Size dialogue box. 2. In this dialogue box, I set my resolution to 72dpi, under pixel dimensions I type in Width: 600 and Height: 600. The program automatically sets the size of the LO to 8.333 inches by 8.333 inches. At the bottom of the box, I make sure I have the following box checked: Resample Image > in the drop down I click on Bicubic (best for reduction). Click OK and then save as a .jpg file. I usually then undo all the actions in the PSD file so that I can make changes to the PSD file in the future or print the file at a different size for bragbooks. 3. Open up your saved .jpg file. I click on File >Save for web. Under Preset > Custom. Make sure that you have JPEG as the optimized file format. I check the boxes for Progressive and ICC profile. I then play with the compression quality number ( I usually stick to anywhere from Medium to High depending on how much of an element cluster frenzy I went on.) to get the quality of image that I'm looking for. You'll get and estimated size in the preview pane as you adjust the slider. My images end up being anywhere from 130 to 156K. When you see what you like, click OK. Then enter file name when prompted by the Save Optimized As prompt. Hope this helps! :) |
Hi, I saw this thread and thought maybe my way of resizing could be useful for someone. I use PS7.
I create my LO in 3600x3600, 300 resolution, when I finish, I save it as psd, and then as jpg, without merging or anything like that, then I open the jpg file with PS and resize it to 600x600 (never change resolution) and save it, and that´s it. Most of the time you get a small file to upload always below 280K, only once I got a bigger one so I did the same and reduce to 580x580 an worked well, never lose any resolution, and the best is your psd file is untouched. I hope it is useful for someone, as I told you I use PS and I don´t know if this can be made in PSE. |
Quote:
Sorry so late in responding. I save my layout at 300 dpi and then I open it in PAINT and change the size to 600 x 600. It seems to be the fastest and easiest way for me to reduce the size for uploading. Hope this helps - if you don't have paint - we can come up with another way. |
I also save mine as a 300 dpi and then I go into the file onmy harddrive and double click the image.It opens using photo editor. I thn click on image tab and resize to 80 %. Save. When you upload to gallery it should be the perfect size.
|
Quote:
|
I recently downloaded a free program on my PC called Photoscape. I use that to resize my pictures. I like the fact that it has a bulk editor, and I can resize an entire folder of pictures. This is so great for me. All of my scrapbook pages have already been photographed and are in files on my external hard drive. Now all I have to do is copy the file to my pc, resize it on Photoscape, correct the sharpness perhaps and the photos are ready to go on Mousescrappers.
I was so grateful the day a fellow poster on another website told me about Photoscape. |
| All times are GMT -7. The time now is 12:48 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
© Copyright 2009 - 2024 MouseScrappers.com, All rights reserved.
MouseScrappers.com is not affiliated in any way with Walt Disney World, The Walt Disney Company, or any of their affiliates or subsidiaries.
Visit Disney's official web site at Disney.com As to Disney artwork, logos and properties: © Disney
Ad Management plugin by RedTyger